refill imprimanta canon pixma mp150

 ameylee, on May 19 2006, 20:11, said:

 ameylee, on May 19 2006, 20:11, said:

incearca aici: http://www.refillins...m/Canon/C25.htm pt CL-41 color
si aici: http://www.refillins...m/Canon/C24.htm pt PG-40 negru

referitor la refill canon mp 150
Reîncărcarea și refolosirea cartușelor de Canon MP 150 s-a realizat și reușit după metoda prezentată pe un site olandez.
1. se pornește imprimanta
2. se ridică capacul și cartușele se deplasează în partea stângă
3. se scot cartușele și se face reîncărcarea. Există pe net două metode de reîncărcare. Puteți alege.
4. pe prima linie orizontală de contacte de la fiecare cartuș se lipește o bandă adezivă. Banda adezivă va acoperii numai prima linie de contacte orizontale
5. se introduc ambele cartușe în locașuri și se închide capacul imprimantei. Cartușele revin la locurile lor. Pe panoul frontal va apărea mesajul E 5
6. trimite spre printare un document. Va apare mesaj că nu recunoaște cartușele sau că acestea nu sunt bine montate. Dați OK. Mesajul va reapare. Ignorați-l.
7. ridicați capacul imprimantei, cartușele se deplasează în partea stângă, scoateți-le pe amândouă și lipiți pe cea de a doua linie orizontală de contacte bandă adezivă
8. introduceți cartușele în locașuri, așteptați ca ele să revină și apăsați OK la mesajul de nerecunoaștere a cartușelor.
9. ridicați din nou capacul imprimantei, scoateți din nou cartușele , dezlipiți benzile adezive, UȘOR,  reintroduceți cartușele și închideți capacul imprimantei. Imprimanta va vedea în continuare cartușele goale dar va printa. Metodă testată.
Ledurile galbene de la black și color se vor aprinde intermitent în continuare. Două mici dezavantaje dar îți poți face treaba.
Spor la treaba.

Daca doriti sa incercati si altceva:
tuto: neutralisé le compteur d'encre canon pour cartouche PG40 PG41
Tester sur une canon pixma MP150
1 Allumez l'imprimante ouvrir le capot pour remplir les cartouches et débranchez le cordon
d'alimentation
2 Remplir la ou les cartouches
3 découper une bande de scotch de 2 millimètres de haut
4 collez la bande de scotch sur la première rangée de contacts (en partant du haut) sur la
cartouche
5 replacer la cartouche dans l'imprimante et rebranchez le cordon d'alimentation et allumez
l'imprimante
6 refermez le capot et avec le logiciel dans propriétés de l'imprimante vous allez avoir un
premier message d'erreur:
7 ouvrez le capot attendre que les têtes se déplacent, débranchez le cordon d'alimentation
enlevez la cartouche avec le scotch
Pntru cei care stau mai bine la capitolul limba franceza. Asteptam sa ne puneti la curent cu reusita dv.

Prima metoda de refolosire a cartuselor de Canon MP 150 dupa ce au fost reumplute dupa un site olandez.
PG-40 / CL-41 / PG-50 / CL-51 / CL-52 cartridges
Voor het resetten van de inktniveau meters (methode 1)
1. Plak met een dun strookje plakband de bovenste rij horizontale contactjes
van de cartridge af (afbeelding 1)
1.  Slice with a thin strip slice tie the top row of horizontal contacts of the cartridge off (image 1)
2. Plaats de cartridge terug in de printer en sluit de deksel.
2.  Place the cartridge back in the printer and closes the lid.  
3. De printer zal nu in beweging komen, maar wacht tot er op het beeldscherm
van uw computer de melding komt dat er op een verkeerde manier een
inktpatroon is geplaatst. Klik bij de melding op OK
3.  The printer will now in movement come, but watch till there on the screen of your computer the report comes
that there on a wrong manner an ink patron have been placed.  Click by the report on OK
4. Open de deksel van de printer en haal de cartridge er weer uit.
4.  Open the lid of the printer and get the cartridge it again out.  
5. Haal nu het strookje plakband van de contactjes af en plak deze nu over de
tweede rij (van boven) horizontale contactjes. (afbeelding 2)
5.  Now the strip get slice tie of the contacts finished and stick these now over the second row (of above)
horizontal contacts.  (image 2)
6. Plaats de cartridge wederom terug in de printer en sluit het deksel. Weer zal
de printer weer in beweging komen, en wederom komt er ook een melding op
uw beeldscherm. Ditmaal geeft de melding aan dat de cartridge niet kan
worden herkend. Klik hier weer op OK
6.  Place the cartridge again back in the printer and closes the lid.  Again the printer will want to come in movement,
and again there also a report comes on your screen.  This time gives the report at that the cartridge cannot be
recognized.  Click here defense on OK
7. Open de printer weer en haal nu voor de laatste maal de cartridge uit de
printer.
7.  Open the printer prevent and get now for the last time the cartridge from the printer.  

8. Verwijder het plakband en plaats de cartridge terug in de printer en sluit het
deksel.
8.  The slice tie and place the cartridge remove back in the printer and closes the lid.
9. De printer ziet de cartridge weer als nieuw en geeft aan dat de cartridge weer
vol
is.
9.  The printer sees the cartridge prevent than new and gives at that the cartridge prevent full is.  
Afbeelding 1 Afbeelding 2
LET OP! Deze resetmethodes blijken niet voor alle cartridges te
werken. Wanneer het resetten niet lukt kunt u altijd nog methode 2
proberen of de inktmeters compleet deactiveren (uitschakelen). Zie
bladzijde 2 en 3 voor meer informatie hierover.
Herkent de printer de cartridges helemaal niet meer na het navullen?
Waarschijnlijk zijn dan de contactpuntjes vies. Maak deze schoon met
wat keukenpapier een een beetje spiritus. Mocht dit niet helpen maak
dan ook de contactpuntjes in de printer schoon.
BORROWS ON!  This reset methodes appeared to not to work for all cartridges.  When the resetten you cannot succeeds try always yet method 2 or the ink meters complete deactiveren (eliminate).  See page 2 and 3 furrow more information of about this.  Recognizes the printer the
cartridges totally no longer after the navullen?  Probable then the contact points are dirty.  Make these cleanly with what kitchen paper an a little bit spirits.  Did not may this help make then also the contact point in the printer clean.

Daca pune cineva informatiile la punct si reuseste sa posteze...  :arigato:
http://www.videoland...canon_pg_cl.pdf

Multumesc anticipat

Eu am pus in practica - sugestia lui Vicentiu 71 si nu a functionat. In site-ul ala olandez spune ca exista probabilitate mare ca metoda 1 sa nu functioneze si sa se incerce metoda 2. (la care nu avem traducere).
Mai mult la sfarsitul operatiunii cartusul imprima prost rau; a trebuit sa trec cu el prin cateva cicluri de deep cleaning - nozzle check ca sa-si revina.


Eu am canon MP 180 si cartus PG 40 (cele color inca functioneaza - cartuse originale).

Edited by silviubb, 03 February 2007 - 09:27.

Ok, mi-am luat si eu Canon MP180 care are aceleasi cartuse, PG-40 negru si CL-41 color. Momentan nu am probleme cu ea ca o am de 2 zile dar cand o sa incarc o sa urmez pasii de aici http://www.refillins...m/Canon/C24.htm si http://www.refillins...m/Canon/C25.htm cu cerneala de la Rastero. Intrebarea este: cu ce dau gaurile in cartuse? M-am gandit cu bormasina electrica cu burghiu de 1-2mm dar mi-e frica sa nu intre bucatele de plastic in cartus, nu vreau sa iau altu, vreau sa il exploatez la maxim . Spuneti-mi voi cu ce ati dat gaurile.
Am mai inteles ca dupa reumplere imprimanta tot zice ca are cartuse goale dar printeaza. Daca aflati cum se procedeaza sa nu le mai vada goale, postati aici .

 vicentiu71, on Feb 1 2007, 17:23, said:

Neutralized the meter of ink for canon cartridge PG40 PG41
To test on a canon pixma MP150
1. Turn on the printer to open the cap to fill the cartridges and disconnect the alimentation cord.
2. Fill the cartouches
3. Cut out a Scotch tape band of 2 millimetres
4. Stick the Scotch tape band on the first line of contacts (on the basis of the top) on cartridge
5. Replace the cartridge in the printer and replug the alimentation cord and turn on the printer
6. Close again the cap and with the software in properties of the printer you will have a first error message:
7. Open the cap to wait until the heads move, disconnect the alimentation cord remove the cartridge with the Scotch tape.

cam asta scrie mai sus in comentul lui vicentiu71. tradus cu:
http://www.worldling...translator.html

tot cu translatorul WordLingo am tradus si pdf-u atasat de vicentiu71:



PG-40 / CL-41 / PG-50 / CL-51 / CL-52 cartridges

Does the printer no longer recognise the cartridges after the refill?
Probably is then contactpunts dirty. Clean these with what kitchen paper a beit spiritus.


For the resete of the ink level meters (method 1)

PAY ATTENTION! These resetmethodes do not appear to work for all cartridges. When the reset do not succeed you can always still try method 2 or the ink meters complete deactivation (eliminate). See page 2 and 3 for further information about this.


1. Plak with thin strooke tape the upper file horizontal contactes from the cartridge (image 1)
2. Put back the cartridge in the printer and closes the lid.
3. The printer will start now, but waits there for the display device of your computer
the report reaches that in a found oneself manner an ink pattern has been placed.
Click at the report on OK
4. Open the lid of the printer and swipe the cartridge there.
5. Now the strooke now take away tape of contactes and the plak these concerning the second file (of above) horizontal contactes. (image 2)
6. Put back the cartridge again in the printer and closes the lid. The printer will start,
and again theres also a report comes on your display device. This time does not give the
report to that the cartridge can be recognised. Click here on OK
7. Open the printer and now obtains for the last time the cartridge from the printer.
8. Remove the tape and place the cartridge in the printer and close the lid.
9. The printer meets again the cartridge as new and reflects to that the cartridge is full.

Image 1 [ http://img254.imageshack.us/img254/1630/image1xz1.th.jpg - Pentru incarcare in pagina (embed) Click aici ]
Image 2 [ http://img258.imageshack.us/img258/5695/image2qi2.th.jpg - Pentru incarcare in pagina (embed) Click aici ]


Depending on the cartridge type that you want to reset (colour, black or photo). Your cartridge can have more or less contactes to sit. Do not pay attention to this number contactes, but plak always the upper file and described the second file from above like above.


The reset of the ink level meters (method 2)
Works only in some cases.

1. Plak with thin tape strooke the bottom file horizontal contactes from the cartridge
2. Put back the cartridge in the printer and closes the lid.
3. The printer will start now, but waits there for the display device of your computer the
report reaches that in one found oneself manner an ink pattern has been placed. Click at
the report on OK
4. Open the lid of the printer and swipe the cartridge there.
5. Now take away the strooke tape of contactes and the plak these concerning the upper file
horizontal contactes.
6. Put back the cartridge again in the printer and closes the lid. The printer will start,
and again there also a report comes on your display device. This time does not give the
report to that the cartridge can be recognised. Click here on OK
7. Open the printer and now obtains for the last time the cartridge from the printer.
8. Remove the tape and place the cartridge in the printer and close the lid.
9. The printer meets again the cartridge as new and reflects to that the cartridge is full.

DE AICI IN JOS NU MAI E TRADUS ASA BINE, NU STIU OLANDEZA

If you refill only 1 cartridge and has at refill can it has let try be that the report that the cartridge are empty remains. Try 1 once again but then by both carry out pattern in this case method at the same time at resetten. (therefore both cartridges tape up and at the same time put back, as it has been described in method 1)


Eliminating the ink level meters (ink monitor)


This method is very easy, but the ink level meter in its whole has is eliminated as a
disadvantage that and that you therefore yourself will have watch when it ink pattern is
almost empty. Pay attention on this good, you can the pattern improve too asked then telaat leave refill, for damages to your printer to occur.


The best moment to leave your cartridge refill are when the printer indicates that the cartridge are almost. Do not will too long expensive with the `empty print of the cartridge because this can cause serious damages to your printer.


Remain exactly as long as doorprinten with your original cartridge (which are already filled) until the printer indicates ink pattern by means of a report on your computer that it
entirely empty is OR that a oranje candle end will there burn that on your printer indicates
that your cartridge are. Now just you can eliminate the ink meter, this is not possible, as
it happens, before the printer has indicated that the pattern is entirely!

At a oranje blinking candle end on your printer:

1. On your printer you will put back after the candle end oranje of the cartridge to see
blinking.
2. Now press approximately 10 seconds on the `paper transitto resume - test (image 3),
until the report jumps.
3. On your printer again the oranje candle end will blink.
4. Now press approximately 15 seconds on the `paper transitto resume - test
5. The ink meters are eliminated.

At a report on your display device:

YOU printer firstly some times will warn that your ink pattern `is almost empty. As from
this first report you can make approximately still 40 a 50 impressions. Hereafter a report
comes on the display device stand that it ink pattern is. Hereafter it is indicated that you,
when you want that, can continue with to print.

For this you must approximately 8 seconds on the `paper transitto resume - test presses
(to see image 3). The printer will go now simply further with the printopdracht, and ink monitor is eliminated.

Image 3 [ http://img443.imageshack.us/img443/9999/image3re0.th.jpg - Pentru incarcare in pagina (embed) Click aici ]

Sal baieti
Am o imprimata MP150 (la birou) si ma innebunise cu cartusele, cand azi pe la 12 am gasit solutia! Am mai citit pe net ca sa resetezi eeprom-ul imprimantei dar nu prea reuseam.
Asa am facut si a functionat:

1. Am scos cartusele (le-am reincarcat)
2. Am pornit imprimanta (fara cartuse)
2.1 Tineti apasat butonul "Cancel" (din stanga butonului On/Off)
2.2 Tineti apasat butonul On/Off (fara sa eliberati butonul "Cancel")
2.3 Dupa 2-3 secunde eliberati butonul "Cancel" (fara sa eliberati butonul On/Off)
2.4 Apasati butonul "Cancel" de 4 ori (la fiecare apasare led-ul butonului On/Off se stinge si se aprinde led-ul de eroare - nu eliberati butonul On/Off)
2.5 Dupa ce apasati de 4 ori eliberati ambele butoane (imprimanta trebuie sa porneasca dar fara sa afiseze nimic pe display sau sa se aprinda vre-un led - in afara de cel al butonului On/Off)
3. Opriti imprimanta
4. Introduceti cartusele
5. Reluati operatia de la pct. 1 pana la pct. 3
Bafta!
Astept intrebari daca aveti nelamuriri.

Pentru pitac9800:
eu asa umplu cartusele http://www.refillinstructions.com/Canon/C24.htm

Edited by ursu82, 08 February 2007 - 21:57.

 ursu82, on Feb 8 2007, 21:53, said:

Esti sigur ca e buna explicatia? eu am tot mp150 si ramane tot eroare SI NU MA MAI LASA SA PRINTEZ.....

 danny22tm, on Feb 10 2007, 01:43, said:

binenteles asa am facut eu si a mers super
Rectific:
1. Am scos cartusele (le-am reincarcat)
2. Porniti imprimanta exact cum scrie mai jos:
2.1 Tineti apasat butonul "Cancel" (din stanga butonului On/Off)
2.2 Tineti apasat butonul On/Off (fara sa eliberati butonul "Cancel")
2.3 Dupa 2-3 secunde eliberati butonul "Cancel" (fara sa eliberati butonul On/Off)
2.4 Apasati butonul "Cancel" de 4 ori (la fiecare apasare led-ul butonului On/Off se stinge si se aprinde led-ul de eroare - nu eliberati butonul On/Off)
2.5 Dupa ce apasati de 4 ori eliberati ambele butoane (imprimanta trebuie sa porneasca dar fara sa afiseze nimic pe display sau sa se aprinda vre-un led - in afara de cel al butonului On/Off)
3. Opriti imprimanta
4. Introduceti cartusele
5. Reluati operatia de la pct. 2 pana la pct. 3

Edited by ursu82, 10 February 2007 - 10:28.

 vicentiu71, on Feb 1 2007, 17:20, said:

salut!
am reincarcat si acum imi apare mesajul E4, nu E5 de care spuneti voi...
ce e de facut??
cand vreau sa listez imi apare mesaju asta:

"Ink has run out
replace the ink cartridge and close the cover"

mentionez ca merge sa xeroxez

multumesc anticipat!

Eu am pixma mp150 aproape de un an. am reincarcat cartusele de 2 ori Cel color e gol de vre-o luna si nu am timp sa ajung la o rencarcare, iar negru mai este. In acest timp am folosit imprimanta mai mult pt scanat, dar azi nu mai mere nici scanatul. imi apare mesajul E si 5. E din cauza cartuselor? sau s-a defectat imprimata? pt ca mai este in garantie si vreau sa stiu daca cumpar cartus, reincarc sau o repar. multumesc

Eu am imprimanta MP160 . Nu stie careva niste pasi mai simpli de .... refill ? Sau cum se mai poate face chestia asta ?

Nu exista ceva service-uri ?

Pfoai.. dar asa... inseamna ca nu mai am garantie la imprimanta ?

"Depinzand de cat de gol era cartusul atunci cand ati facut reumplerea, imprimanta va da, intr-o fereastra, pe monitorul calculatorului, unul din mesajele:
- "Ink is running low"; in acest caz apasati butonul "Ok" sau "Out of paper" de la imprimanta

- "Ink has run out"; in acest caz dati clic pe butonul "Yes" din fereastra; cand apare apoi mesajul "Press and hold the Stop/Reset button", apasati si tineti apasat butonul "Stop/Reset" de la imprimanta, timp de 10 secunde;

Nota: Manevrele de mai sus vor dezactiva permanent sistemul de detectie a nivelului cernelii din cartus; asta nu va impiedica sa folositi cartusul in mod normal si sa-l umpleti din nou cand se goleste. "

Edited by lk1, 05 June 2007 - 17:01.

 lk1, on Jun 5 2007, 17:52, said:

Salut,
Eu am uploadat pe forum instructiunile de refill pentru cartusele de la MP160 ...cauta dupa gabicen.
Cel mai bine este sa incarci cartusele...din cand in cand INAINTE de a apare mesajele de mai sus.

Gabriel
consumabile.org

[quote name='pitac9800' date='Feb 4 2007, 18:32' post='2401842']
Ok, mi-am luat si eu Canon MP180 care are aceleasi cartuse, PG-40 negru si CL-41 color. Momentan nu am probleme cu ea ca o am de 2 zile dar cand o sa incarc o sa urmez pasii de aici [url="http://www.refillinstructions.com/Canon/C24.htm"]http://www.refillinstructions.com/Canon/C24.htm[/url] si [url="http://www.refillinstructions.com/Canon/C25.htm"]http://www.refillinstructions.com/Canon/C25.htm[/url] cu cerneala de la Rastero. Intrebarea este: cu ce dau gaurile in cartuse? M-am gandit cu bormasina electrica cu burghiu de 1-2mm dar mi-e frica sa nu intre bucatele de plastic in cartus, nu vreau sa iau altu, vreau sa il exploatez la maxim . Spuneti-mi voi cu ce ati dat gaurile.

Reincarcarea cu tus se poate face folosind acele de la seringi de 1 ml fara a mai practica largirea gaurilor de pe capacul cartusului, direct prin eticheta cartusului. Dupa refill nu acoperiti eticheta cu scotch, pentru ca acele gaurele sunt destul de fine, si realizeaza si echilibrarea la presiunea atmosferica.
Succes !!!

Salut,

Ref. al Canon Pixma MP180:
Eu am reusit sa scap de mesaj prin metodele descrise mai sus. (desi am asteptat pina sa apara mesajul de eroare).
Procedura e destul de greoaie dar odata facuta nu mai sunt probleme (a trecut 1 an de cand fac refill si mesajul nu mai apare).
Am luat si o solutie de curatat duzele (la 2-3 reumpleri se mai infunda)
Merge OK.

Edited by silviubb, 13 June 2007 - 22:22.

Ami spune si mie cineva ce inseamna codul de eroare E5 la imprimanta MP150?Am si eu unul care nu functioneaza.Din pacate asa l-am primit cu codul de eroare E5.