DSM 7.2 pe HP Microserver Gen 8

#1
Adm

Posted 12 January 2024 - 10:51

Property Caretaker

Grup: Administrators
Posts: 24,205
Înscris: 22.05.2003

Dupa "succesul rasunator" al DSM 7.1 pe HP Microserver Gen 8, avem acum episodul despre DSM 7.2

Lucrurile au evoluat masiv si procesele sunt extrem de automatizate.

Recomand sa aveti cel mai nou iLO (2.82 acum) si BIOS pentru Gen8 (din 2019).
Le gasiti aici.

BIOS settings:

Spoiler

F9 -> RBSU
In RBSU:
- System Options -> Serial Options -> Virtual Serial Port: Disabled
	 -> Embedded NICs -> NIC 1 Boot Options: Disabled
	 -> NUMLOCK Power-On State: On
	 -> SATA Controller Options -> Embedded SATA Configuration: Enable SATA AHCI Support
- Power Management Options -> HP Power Regulator: OS Control Mode
	 -> Advanced Power Management Options -> Intel QPI Link Power Management: Enabled
				 -> Minimum Processor Idle Power Core State: C6 State
				 -> Minimum Processor Idle Power Package State: Package C6 (retention) State
				 -> Maximum Memory Bus Frequency: Auto
				 -> Memory Interleaving: Full Interleaving
				 -> PCI-E Gen 3 Control (For Select Devices) -> PCI-E Slot 1: Enabled
				 -> Maximum PCI Express Speed: Maximum Supported
				 -> Dynamic Power Savings Mode Response: Fast
				 -> Collaborative Power Control: Enabled
				 -> DIMM Voltage Preference: Optimized for Performance
- Date and Time: set the correct time and date
- BIOS Serial Console & EMS -> BIOS Serial Console Port: Enabled
- Advanced Options -> Advanced System ROM Options -> NMI Debug Button -> Disabled
				 -> Virtual Install Disk -> Disabled
				 -> Power-On Logo -> Enabled
ESC, confirmati cu F10, apoi apasati iar F9 -> RBSU
- Systen Options -> SATA Controller Options -> Drive Write Cache: Enabled
- Standard Boot Order (IPL) IPL:1 Hard Drive C: (See Boot Controller Order)
	 IPL:2 USB Drive Key (C:)
	 IPL:3 CD-ROM
	 IPL:4 Floppy Drive (A:)
- System Default Options -> User Default Options -> Save User Defaults -> Yes, Save
Begin Installation OS

Vom folosi Arc Loader for DSM 7.x

Descarcati cea mai noua varianta de aici.

In cazul meu, am folosit arc-24.1.6.img.zip - l-am scris pe MicroSD cu Balena Etcher.

Boot de pe MicroSD si trebuie sa aflati de la router sau din iLo ce IP primeste, apoi puteti accesa configurarea pe IP

http://IP_Loader:7681

Am lasat modulele default + certificate update si am folosit real MAC address si am optat DS3622xs+ (asta aveam si pe DSM 7.1)

Dupa ce a terminat de construit loaderul, a restartat si am accesat IP-ul xpenology, am ales sa pastreze datele si l-am masat sa isi descarce singur fisierul DSM.

Dupa 10 minute restart si totul merge perfect.

12.jpg 97.07K 31 downloads

13.jpg 81.91K 32 downloads

14.jpg 89.97K 29 downloads

15.jpg 58.67K 33 downloads

Vestea buna e ca acum puteti face update la loader direct din el, apoi puteti updata DSM la orice varianta micro din gama 7.2.x
Pt a accesa direct loaderul, din ssh rulati arc.sh

===

Va recomand ca dupa ce efectuati upgrade, sa stergeti Active Insight

Sursa

Pt a scoate mai multe gunoaie rulati asta ca user root in Task Scheduler

synoservice --disable pkgctl-SynoFinder
synopkg uninstall SynoFinder
synoservice --disable pkgctl-ActiveInsight
synopkg uninstall ActiveInsight
synoservice --disable pkgctl-ScsiTarget
synopkg uninstall ScsiTarget
synoservice --disable pkgctl-SecureSignIn
synopkg uninstall SecureSignIn
synoservice --disable pkgctl-Python2
synopkg uninstall Python2
synopkg --disable HybridShare
synopkg uninstall HybridShare

Attached Files

1.jpg 58.57K 33 downloads
2.jpg 94.13K 30 downloads
3.jpg 33.8K 25 downloads
4.jpg 41.49K 21 downloads
5.jpg 34.58K 19 downloads
6.jpg 34.09K 20 downloads
7.jpg 14.79K 21 downloads
8.jpg 108.33K 18 downloads
9.jpg 22.42K 16 downloads
10.jpg 47.89K 15 downloads
11.jpg 22.99K 15 downloads

Back to top

#2
WorstSpiderman

Posted 12 January 2024 - 18:38

Member

Grup: Members
Posts: 303
Înscris: 18.06.2019

e sigura eliminarea "gunoaielor"?
imbunatatiri vazute dupa rularea task-ului au aparut?

merci

Back to top

#3
Adm

Posted 12 January 2024 - 19:32

Property Caretaker

Grup: Administrators
Posts: 24,205
Înscris: 22.05.2003

sunt bloatware.

Back to top

#4
Adm

Posted 29 March 2024 - 17:59

Property Caretaker

Grup: Administrators
Posts: 24,205
Înscris: 22.05.2003

Am instalat DSM 7.2 si pe un ff vechie HP Microserver N54L.

Intructiunile sunt asemanatoare, doar ca:

1. trebuie BIOS modificat (suporta SATA 3).
Atasat BIOS modifi si original.

Dupa update BIOS -> Load Optimised Defaults, Save - Restart.

CE1 Support = Disabled
HDD SATA MODE
DATA MODE 3 Gbs
Enable Write Cache

2. Trebuie Direct boot in optiunile boot loader (imaginea atasata).

optiuni.png 21.95K 10 downloads

Attached Files

N40L-Mod-Files.zip 3.83MB 1 downloads

Back to top

Anunturi

Chirurgia spinală minim invazivă

Chirurgia spinală minim invazivă oferă pacienților oportunitatea unui tratament eficient, permițându-le o recuperare ultra rapidă și nu în ultimul rând minimizând leziunile induse chirurgical.

Echipa noastră utilizează un spectru larg de tehnici minim invazive, din care enumerăm câteva: endoscopia cu variantele ei (transnazală, transtoracică, transmusculară, etc), microscopul operator, abordurile trans tubulare și nu în ultimul rând infiltrațiile la toate nivelurile coloanei vertebrale.

www.neurohope.ro

DSM 7.2 pe HP Microserver Gen 8

#1 Adm Posted 12 January 2024 - 10:51

Attached Files

#2 WorstSpiderman Posted 12 January 2024 - 18:38

#3 Adm Posted 12 January 2024 - 19:32

#4 Adm Posted 29 March 2024 - 17:59

Attached Files

Anunturi

▶ 1 user(s) are reading this topic

Sign In

#1
Adm

Posted 12 January 2024 - 10:51

#2
WorstSpiderman

Posted 12 January 2024 - 18:38

#3
Adm

Posted 12 January 2024 - 19:32

#4
Adm

Posted 29 March 2024 - 17:59