Eroare A media driver you computer needs is missing

Download and execute Rufus

Rufus is an open source program licensed under the GPL.^[1]
Rufus can be downloaded directly from the developer's website. The program does not need to be installed, it can be executed simply.
Create UEFI USB flash drive

To create a UEFI bootable Windows installation flash drive with Rufus, you have to make the following settings:

• Drive: Select the USB flash drive you want to use
  
  
• Partitioning scheme: Select GPT Partitioning scheme for UEFI here
  
  
• File system: Here you have to select NTFS
  
  
• Create a bootable drive with ISO image: Select the corresponding Windows ISO
  
  
• Create extended description and symbols: Tick this box

The UEFI USB stick is automatically created by clicking Start.

Apoi cu DiskPart....

Preparing the USB Stick

A new primary partition is created on the USB flash drive, formatted with the FAT32 file system and assigned a drive letter.
To do this, execute the following commands:
diskpart
list disk
select disk #
clean
create partition primary
select partition 1
active
format quick fs=fat32
assign
exit


Apoi copiezi fișierele pe stick

Copy Windows installation files to the USB flash drive
The next step is to copy the Windows installation files to the USB flash drive.
You can do this by simply using Copy - Paste. It doesn't matter whether you have mounted, unpacked or inserted an ISO image in Windows or an installation DVD.
If the install.wim file of the Windows image is larger than 4GB, an error will occur during the copying process. At the end of the copy process, the message that the file is too large appears. This message appears, because the FAT32 file system reaches its limits and cannot process >4GB files.
In order to finish the UEFI-USB-Stick you have to use a little trick:
Using DISM, the file must be split into two or more <4GB files. Please note that this process is only possible up to Windows 7 or Windows Server 2008.[3][4]
Simply enter the following command:
Dism /Split-Image /ImageFile:E:\sources\install.wim /SWMFile:C:\Users\Administrator\Desktop\install.swm /FileSize:3000
/ImageFile: Path of the source file install.wim in the sources folder of the Windows ISO
/SWMFile: Path of the split target files
/FileSize: Maximum size of split target files in MB