Ubuntu Lenovo G50-30
Last Updated: Nov 26 2014 10:20, Started by
sirius208
, Oct 23 2014 22:57
·
0
#1
Posted 23 October 2014 - 22:57
Am pus acum Ubuntu pe el. Prima problema e conexiunea wireless ce nu merge de prima data.
L.E De cate ori il pornesc nu merge pana nu-i dau comanda sudo modprobe -r ideapad-laptop N-am apucat sa caut dar probabil trebuie sa existe o solutie permanenta. Softpedia from 2014-10-23 23:52:14.png 476.6K 16 downloads Mutat de la subiectul Instalare Windows 7-32 biti pe Lenovo G50-30 - fost "salut".
Edited by _-_, 25 October 2014 - 10:36.
|
#2
Posted 23 October 2014 - 23:29
Asta e solutia pentru wireless
echo "blacklist ideapad_laptop" | sudo tee -a /etc/modprobe.d/blacklist-ideapad.conf |
#3
Posted 24 October 2014 - 09:41
Sirius ar trebui sa ai in Ubuntu ,,Additional Drivers" il gasesti pe la aplicatii. Daca nu il gasesti intrii in System Settings---- Software and updates------ ultimul tab este Additional drivers. O sa iti gaseasca driverul pt. wireless dai install.
Daca mai ai nelamuriri in ceea ce priveste ubuntu o sa gasesti raspunsurile pe forum http://forum.ubuntu.ro/ Edited by ved3neu, 24 October 2014 - 09:43. |
#4
Posted 25 October 2014 - 10:01
Pune si tu un lspci sunt curios ce modul wireless are.
|
#5
Posted 25 October 2014 - 10:23
din cate vad pe net mai sunt si altii cu acest model de laptop cu aceeasi problema
cred ca iti trebuie driver RTL8723BE info: http://ubuntuforums....d.php?t=2243978 Cel de la LENOVO ignora complet pe site-ul oficial LINUX-ul fara cuvinte... Edited by Mihai_3, 25 October 2014 - 10:36. |
#6
Posted 26 November 2014 - 10:20
Rezolvarea pentru Wi-Fi si luminozitate
sudo modprobe -r ideapad-laptop sudo rfkill unblock all rfkill list all .............. echo "blacklist ideapad_laptop" | sudo tee -a /etc/modprobe.d/blacklist-ideapad.conf http://zoringroup.co....php?f=6&t=8335 How to configure Lenovo IdeaPad G50-30 to Zorin 9 Postby Henriolavi » Mon Sep 15, 2014 3:59 pm Lenovo IdeaPad G50-30 is an economical solution to have a new notebook with full capability to run Zorin 9 Core / Educational or Ultimate. There is good interfacaces and peripherals like Usb 3.0 port, CD/DVD drive and full keyboard which are not often available in the lowest priced laptops (250 €). The architecture is 64 bit with Intel dual core Celeron ® CPU N2830 @2,16 GHz. 4Gb RAM and 500Gb Seagate HDD. However it does not run all things (Zorin 9 ) out of the box requiring some "post install configurations" as follows: To get WiFi internal (or WiFi USB adapter) working requires folloving:. Removing the ideapad_laptop module sudo rmmod ideapad_laptop for working after reboot: echo "blacklist ideapad_laptop" | sudo tee -a /etc/modprobe.d/blacklist-ideapad.conf echo "options rtl8723be fwlps=N ips=N" | sudo tee /etc/modprobe.d/rtl8723be.conf Source: praseodym (german) ubuntu-forum.de To get brightness controll working following backlight configuration file has to be installed: Open a terminal and create the following configuration file, if it does not exist: sudo touch /usr/share/X11/xorg.conf.d/20-intel.conf Now we need to edit this file. You can use any editor be it a terminal one or graphical. sudo gedit /usr/share/X11/xorg.conf.d/20-intel.conf Add the following lines to this file: Section "Device" Identifier "card0" Driver "intel" Option "Backlight" "intel_backlight" BusID "PCI:0:2:0"EndSection Save it. Log out and log in back. The brightness control should be working through function keys now: Source: It's F.O.S.S , itsfoss.com After these config changes and additions all is working fine (from syst.settings and function keys). This apply also to Ubuntu 04,14 LTS and to other Lenovo G50 laptops and other make with intel backlight display control. http://ubuntuforums....=2243978&page=2 14 Answers active oldest votes up vote 40 down vote accepted You could try adding a line to /etc/rc.local that will set the desired brightness level. To edit the file, run gksudo gedit /etc/rc.local and add the following echo X > /sys/class/backlight/intel_backlight/brightness so that the end result looks like this #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo X > /sys/class/backlight/intel_backlight/brightness exit 0 Substitute the X by the desired brightness level |
Anunturi
Bun venit pe Forumul Softpedia!
▶ 0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users