Preparing automatic repair diagnosing your pc

If Windows 10 fails to boot normally three times over, the fourth time, it enters by default in an Automatic Repair mode. Using this mode, you can boot into Safe Mode. To trigger the Automatic Repair mode, you must interrupt the normal boot process three consecutive times: use the Restart or the Power button on your Windows 10 PC to stop it during boot, before it finishes loading Windows 10. If you use the Power button, you might have to keep it pressed for at least 4 seconds to force the power off. When Windows 10 enters the Automatic Repair mode, the first thing you see is a screen that tells you that the operating system is “Preparing Automatic Repair.”

How to start Windows 10 in Safe Mode using automatic repair
How to start Windows 10 in Safe Mode using automatic repair
Then, you may be asked to choose an account to continue. Choose an account that has administrator permissions.

Choosing an account to log in
Choosing an account to log in
Next, type the password of the selected administrator user account. If you are not prompted for this information, skip to the next step.

Entering the password of the user account
Entering the password of the user account
Wait for Windows 10 to try to make an automatic diagnosis of your PC.

Diagnosing your Windows 10 PC
Diagnosing your Windows 10 PC
On the “Automatic Repair” screen, press the “Advanced options” button.

Accessing the advanced troubleshooting options
Accessing the advanced troubleshooting options
Then, choose Troubleshoot.

Troubleshoot Windows 10
Troubleshoot Windows 10
From here on, the steps you have to take are the same as those shown in the first method from this guide. Follow the path “Advanced options -> Startup Settings -> Restart.” Then, press the 4 or the F4 key on your keyboard to boot into minimal Safe Mode, press 5 or F5 to boot into “Safe Mode with Networking,” or press 6 or F6 to go into “Safe Mode with Command Prompt.”
3. How to enter Safe Mode in Windows 10 using installation media and the Command Prompt
If you have a Windows 10 setup DVD or USB memory stick lying around, or if you can create one right now, you can use it to boot your broken PC with Windows 10 into Safe Mode. Then, boot your broken Windows 10 PC from it and wait for the installation environment to load. Choose the language and keyboard layout you prefer and click or tap Next.

The Windows 10 Setup
The Windows 10 Setup
Click or tap on the link that says “Repair your computer” on the bottom left corner of the screen.

Repairing your Windows 10 computer
Repairing your Windows 10 computer
When asked what option you prefer, choose Troubleshoot.

To get to Windows 10 Safe Mode, select Troubleshoot
To get to Windows 10 Safe Mode, select Troubleshoot
On the “Advanced options” screen, click or tap “Command Prompt (Use the Command Prompt for advanced troubleshooting).”

Starting the Command Prompt
Starting the Command Prompt
Inside the Command Prompt window, type the command: bcdedit /set {default} safeboot minimal. Press Enter on your keyboard and, after a moment, it tells you that “The operation completed successfully.”

How to boot in Safe Mode from the Command Prompt
How to boot in Safe Mode from the Command Prompt
Close the Command Prompt and choose to Continue on the next screen.

Choose Continue to start Windows 10 in Safe Mode
Choose Continue to start Windows 10 in Safe Mode
After your PC reboots, Windows 10 starts into Safe Mode. Log in with a user account that has administrator permissions, and perform the changes you want.
IMPORTANT: The problem with this method is that it tells Windows 10 to enter Safe Mode automatically, every time you start it, until instructed otherwise. To disable this setting and get Windows 10 to boot normally again, run the same procedure one more time and type the command: bcdedit /deletevalue {default} safeboot.

Daca tot nu poti repara, reinstall cu optiunea sa pastrezi fisierele personale.

Când instalezi de pe usb sau dvd, nu rețin să ai opțiunea asta ...
Zic bine ?