Coduri secrete pentru telefoanele Zapp

 daalos, on Jun 15 2007, 07:58, said:

Pai faza cu vibratiile o stiam si eu.Credeam ca se poate face ceva sa scoti sunetul ala pentru totdeauna!

 daalos, on Jun 15 2007, 07:58, said:

te rog detaliaza setarea asta. se aude mai tare in difuzor? si ce setare este exact? cum se ajunge la ea si ce parametru trebuie pus?

ms.

Se ajunge din meniul secret al telefonului folosind codul de mai sus. Setarea nu este pentru difuzor ci pentru microfon. Te faci auzit mai bine.

Salutari
Revin din nou cu cateva coduri pentru telefoanele CDMA  printre care si cele (mult asteptate) pentru Z810i (Ubiquam U-300)   Enjoy :!:

Renegate™ si acest forum nu isi asuma nici o responasabilitate pentru folosirea incorecta a codurilor si pentru ca din nestiinta v-ati distrus telefonul si l-ati transformat intr-o caramida inutila

Samsung sph-n240, n400, a460, a500, etc Nam Programming :

Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok



Samsung a530, a610, a620, a660, a670, etc Nam Programming :

Nam Set: Menu, 6, *

Nam Set: ##3238, ok

Nam Set: ##SPC (##000000), ok

Service Menu: Menu, 9, *

Test Mode: 47*68#13580

Test Mode: 47*869#1235



Samsung X, E, V, S-series (korean models), e250, v420, s350, etc Nam Programming :

Nam Set: 6548#0**4#6

Nam Set: 47*869#08#9

Nam Set: 74153697193

Test Mode: 5809540*45680 (88 - EFS reset)

Debug Menu: Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415

Debug Menu: Menu+0(hold 2sec), 6725 or 9720 or 1973 or 0415

Debug Menu: Home(top of keypad)+0, 6725 or 9720 or 1973 or 0415



Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming :

Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key:  Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69



Samsung N356 (India version) Nam Programming :

Test Mode: Menu, 5, down arrow, *

Test Mode: **00## (in some flashes)



Samsung i700, etc Nam Programming :

Nam Set:  Go to start and select "PHONE" from the drop down menu, dial #83587


Samsung i300, etc Nam Programming :

1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. Enter OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice




TEST MODE COMMANDS:

n105_test_mode.txt

a500_test_mode.txt

a530_test_mode.txt






<<KYOCERA>>


--------------------------------------------------------------------------------

Kyocera 2345, 3035, 5135, 6035, Se47, KX, KE - series, etc Nam Programming :

Nam Set: 111111+Jog Dial(Ok)

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer: ##786,ok

A-key: ##2539,ok



Tips:

On some kyocera handsets the factory service module has not been disabled

and the phone can be programmed without the Spc by inputting:

Nam Set: ##333333 menu (service)



Qualcomm qcp-800 Nam Pogramming :

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc






<<SANYO>>


--------------------------------------------------------------------------------

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming :

Nam Set: ##Spc+Ok+Key Down+Ok

Advanced Setup: ##3282+Ok+Key Down+Ok+Msl

A-key: ##2539+Ok+Key Down+Ok

Version: ##**837+Ok+Key Down+Ok

Debug Menu: ##FSC+Ok+Key Down+Ok

Airtime menu: ##8463+Ok+Key Down+Ok

Change CAI: ##7738+Ok+Key Down+Ok

Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok

Set IP Address: ##2769737+Ok+Key Down+Ok

TTY On/Off: ##889+Ok+Key Down+Ok

Ready Link: ##4636+Ok+Key Down+Ok

Browser Init On/Off: ##4682+Ok+Key Down+Ok

Picture Token: ##25327+Ok+Key Down+Ok

Unknown Code: ##5282277+Ok+Key Down+Ok

(SPC=000000, FSC=040793)



Sanyo scp-A011,  smp-A017, etc Nam Programming :

Nam Set: F9(3 beep) + 0*72696#767



  

<<AUDIOVOX / UTSTARCOM>>


--------------------------------------------------------------------------------

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming :

Power the phone ON and wait until the little light on top goes out, then press:

Nam Set: 289,Fcn, #,1

Service menu: Fcn,0,0, FSC



Power the phone ON and press:

Test Mode: Hold (2,*,Rcl) + Power



Test Mode Commands:

99 - download - flash phone
124 - inam data write
125 - version
126 - get ESN
127 - get SPC
128 - get User lock

129 - is WFTV data write
137 - get FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range



Audiovox (Hyundai) cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming :

Nam Set: ##20022002, end

Read user lock: #5625*, end

DM baud rate: ##2283, end

DM mode enable: **1004, end

DS mode enable: **1005, end

Misc. Test: ##27752345, end

S/W Test1: ##27732726, end

S/W Test2: ##2240, end

Debug screen: ##2773, end

Clear MRU: ##6782, end

Rfnu_Contents: ##2250, end

?????: ##1133, end

?????: ##1144, end

P_Rev: ##7738, end

GPS Test: ##4771, end

A-Key: 2538**

SMS Eng: ##767364, end

Battery_adc: ##2768, end

Tests: ##1122, end



Audiovox 8610, 8910, etc Nam programming :

Name Set: ##847446, end, 111111



Audiovox pcx-3500xl Nam Programming :

Nam Set: ##2726+Send+1998+1+Spc+1



Audiovox-107 Nam Programming :

Nam Set: 45680*47*869#1



Audiovox CMP-3 Nam Programming :

Nam Set: 45680*47*869#1

Dm Mode: Menu, 6, 6



Audiovox 9950 Nam Programming :

Nam Set: ##3282



Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming :

Nam Set: m + # + envelope key + * + 1



Audiovox Thera (Toshiba 2032) Nam Programming :

Thera Nam Programming User Manual - nam_thera.pdf



Audiovox (UTStarcom) 6600 PPC Nam Programming :

Programming User Manual - programming_instructions.pdf



  

<<MOTOROLA>>


--------------------------------------------------------------------------------

Motorola 7760, 7860, 2260, 8160, etc Nam Programming :

Nam Set: Fcn,0000000000000, Rcl

Nam Set: 74663#, Fcn, Fcn

Test Mode: Fcn, 00**83786633, Sto



Motorola v60c, v120c etc Nam Programming :

Nam Set: 74663#, Menu, Menu, Spc

Nam Set: Menu, 073887, * (type quickly)

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284



Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)



Motorola Razr V3C Nam Programming:

Nam Set: 74663 # clr clr

Nam Set: #073887* , then SPC



Motorola Q Nam Programming:

Nam Set: [Send] + 074663 + [Send] + [Send], Selecct NAM#



Motorola t182, c210, etc Nam Programming :

Nam Set: ##298645665, end

Short Nam: ##073887, sto

Debug Menu: ##1111, end

Service Menu: ##2222, end

Sound NS/EC on/off switch: ##1113, end



Motorola v710, v730, v740, ms150, etc Nam Programming :

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#



Motorola StarTac 2004 Nam Programming :

Nam Set: 5759789*#, press "Rec" button 3 times, (spc - 915037)



Motorola ms200, ms400, ms800, etc Nam Programming :

Nam Set: 5759789*#, press "Camera" button 3 times, (spc - 915037)

Nam Set: 246791538*#, press "Camera" button 3 times, (spc - 915037)



Motorola v6060 Nam Programming :

Nam Set:147*369#456*0#





MOTOROLA TEST MODE :



v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press 000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

    choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

    quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

    the above sequence and scroll down to where it says "DISABLE" instead of

    "ENABLE" and choose select.



Motorola Bible (old models) - bible.txt






<<NOKIA>>


--------------------------------------------------------------------------------

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming :

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#



Nokia 8887 Nam Programming :

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#



Nokia 8587 Nam Programming :

Nam Set: *#626#7764726#

A-Key: #8159357022#4579# (26 digits)

A-Key: #8159357022#4547# (20 digits)

Version: *#0000#

Version: *#837#

Vocoder: *#3872#

Change language: Menu 5, 3, 1

Change DM mode: *#7678#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#



SPC Unlock, Factory Reset :

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)





NOKIA TEST MODE:



51xx, 61xx, 71xx, 3285, 63xx, etc :

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

    down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

    "Field Test" choose SELECT. Press 0 0 and then choose OK.



3360, 6360, etc :

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

    down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

    "Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.



  

<<LG>>


--------------------------------------------------------------------------------

Lg LX,VX-series, VX4400, VX6000, etc Nam Programming :

Nam Set: ##Spc(#)

Nam Set: Menu, 0

Advanced Settings: ##2342(#)

Vocoder: ##8626337,ok(#)

CAI Change: ##7738,ok(#)

Enable TTY: ##889,ok(#)

A-key: ##2539,ok(#)

Reset (Life time, Clear Memory, etc): ##786,ok(#)



lgc-300, etc Nam Programming :

Nam Set: Menu, 9, Spc

A-key: Press "Sto" 3sec, 2539**



lgc-330w, etc Nam Programming :

Nam Set: Menu, 4, 0, Spc

A-key: 2539**



lgc-510, v111, etc Nam Programming :

Nam Set: Menu, 3, 0, Spc

A-key: 2539**



lgc-500, 800w, etc Nam Programming :

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**







<<ERICSSON / SONY-ERICSSON>>


--------------------------------------------------------------------------------

SonyEricsson T608, etc Nam Programming :

Nam Set: 923885, joystick >, 111111

Nam Set shot: 987, joystick >, 111111

Nam Set long: 222652, joystick >, 111111

Vocoder: ##8626337, joystick >, 111111

Debug screen: ##33284, joystick >

Life Timer: ##786, joystick >

SW ver: 9#4#3#, joystick >

Edit Profile: ##3282, joystick >

Service menu: *#06*



Ericsson A1228c, T61, etc Nam Programming :

Short NAM: 987+Menu

Long NAM: 923885+Menu+Spc

CDMA Mode: 904093+Menu

Analog Mode: 904095+Menu

QNC: 904097+Menu

Debug Screen: 904090+Menu

DM Mode: 904050+Menu







<<EPSILON / COMPAL>>


--------------------------------------------------------------------------------

Epsilon vc-5x, Compal 1100, etc Nam Programming :

Nam Set:: **321456987##

Short Nam: **147258963##

Service Menu 1: **1232580##

Service Menu 2: **078987##

Service Menu 3: **1234756##

Show SPC: **3214569871472365##

Version: **1470963##

Debug: **000000##

A-key: 2539**

Reset: **14789##






<<SK TELETECH>>


--------------------------------------------------------------------------------

Sky All Models Nam Programming :

Nam Set: #7583538324#626#

Nam Set: *759#364*7388464#

Min simple mode: #758353266#646#

Irm simple mode #758353266#476#

Voice memo: #8767#277#

Test Mode: #7583538324#8378#

A-key: #758353266#2539#

Service Menu: Menu+4+0+Spc

Service Menu: Menu+5+0+Spc






<<WITHUS / MODOTTEL>>


--------------------------------------------------------------------------------

Withus wce-100, 200, 300, etc Nam Programming :

Nam Set: ##948487+Save

Nam Set: ##948482+Save

Nam Set: ##66835+Save

SMS Settings: ##76766

NVM Rebuild: ##777464






<<GTRAN>>


--------------------------------------------------------------------------------

Gtran gcp-2000 Nam Programming :

Nam Set: 01#737+Spc

Debug Menu: 01#324+Spc

Debug Mode: 01#727

Test Mode: 01#764+Spc

System Test Mode: 01#768+Spc



Gtran gcp-5000 Nam Programming :

Debug Mode: 01#727+Spc

Test Mode: 01#765






<<HYUNDAI>>


--------------------------------------------------------------------------------

Hyundai hwp-110 Nam Programming :

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)



Hyundai hgc-120, 130, 200 Nam Programming :

Nam Set: #86904**89397#



Hyundai hgc-310, 600, 610 Nam Programming :

Nam Set: ##20022002, end, 1, Spc Code

Field Test: ##20022002, end, 1, Master Code



Hyundai Curitel h100, 150,  hx510b, 520, etc Nam Programming :

Nam Set: ##20022002, end, 1, Spc Code

Field Test: ##20022002, end, 1, Master Code

A-key: 2539**

Debug Menu: ##27732726, end

Sar Test: ##27752345, end

Baud Rate: ##36**, end

DM mode enable: **1004, end

DS mode enable: **1005, end

Test Bell/Voice/Led/Dot: ##1122, end

RF Mode: ##2240, end

Ras Ram: ##2774, end

Cmux1: **0481, end

Cmux2: **0482, end

RX Mode Fax: **0492, end

RX Mode Data: **0491, end

RX Mode Reset: **0490, end






<<HUAWEI>>


--------------------------------------------------------------------------------

Huawei ETS-668, 678, 688, etc Nam Programming :

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu

Master Code for all Huawei models is  -  309296





<<PANTECH / CURITEL>>


--------------------------------------------------------------------------------

Pantech hx-525b, 550, 570, 575, etc Nam Programming:

Nam Set: ##13*92*#62* + Pwr

Debug Mode: ##*193*762534#* + Pwr (R-UIM mode disable)

Debug Mode: ##27732726 (R-UIM mode enable)

DM Mode Enable: ***18*#826*

Full Reset: ##03*934#9367*192#397#7412569746 + Pwr

MultiTest: ##22635*262* + Pwr

Cmux1: ***12*#811# + Pwr
Cmux1: ***37*#922* + Pwr
RX Mode Data: ***83*#247 + Pwr
RX Mode Reset: ***64*#133# + Pwr
DS Mode On: ***12045#*# + Pwr
RF NV Init: ##0*#*63861829372# + Pwr
RAS_RAM: ##3*13091#1279#* + Pwr



  

<<VK MOBILE>>


--------------------------------------------------------------------------------

VK-100C, 110C, 200C, etc Nam Programming :

Nam Set: 153147539741593

Test Mode: 153147539123258 (88 - clear efs)






<<GIGA TELECOM>>


--------------------------------------------------------------------------------

Z510, Z710i(gcd-456) Nam Programming :

Nam Set: Menu+0+Spc





<<AnyDATA>>


--------------------------------------------------------------------------------

AMC450 Nam Programming :

Nam Set: *74269#*748#96148063+SEL





<<ZTE>>


--------------------------------------------------------------------------------

ZTE C150, C160, C170, C180, C220, etc Nam Programming:

Nam Set: *983*3641#  (R-UIM mode)

Nam Set: #1463*389*



ZTE C201 Nam Programming:

Nam Set: *983*7358#






<<UBIQUAM>>


--------------------------------------------------------------------------------

U100, U105, U200, U300 ( Z810i ), etc Nam Programming :

Nam Set: ##3435871

BREW Set Menu: ###751214

System Test: ##33582

Handset Test: ##3435873

Handset Test: ##3435875

Factory Test Mode: ##3435874

Factory Reset & Programming ##3435870







<<SYNERTEK>>


--------------------------------------------------------------------------------

Synertek S200 Nam Programming :

Nam Set: Menu+0+Spc

Debug Mode:

Test vibro/rx/tx: ##5555+Save

Debug Screen: ##33+Save

Debug Screen: ##523+Save

RF Test: ####+Save

Unknown code: ##325+Save



  

<<SONY>>


--------------------------------------------------------------------------------

Sony CM-M1300, 3300, Z200 Nam Programming :

Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc

Edited by Renegate, 19 June 2007 - 18:58.

ceva pentru z530i ? se poate da volumul mai tare in casca ????

 Renegate, on Jun 7 2007, 16:00, said:

Pentru netmonitor nu ai ?

 LunaCrystal, on Jan 27 2008, 07:26, said:

In acelasi meniu secret ( meniu+0), gasesti debug screen parca. Cred ca la asta te referi.

Nu la aia ci la netmonitor.

stie cineva coduri?ceva smecherii?

Un cod pentru netmonitor pe Z110 nu stie nimeni ? Am citit tot topicul, dar nu m-am lamurit care ar fi codul.

Sal ! Pentru un Ubiquam U-300 ( Z810i ) un cod pentru deblocarea telefonului in momentul in care pe ecran apare mesajul : " Introduceti cartela UIM " ?
Nu se poate apela decat 6 numere de urgenta presetate . Multumesc pentru ajutor !


Telefonul nu recunoaste nicio cartela ( SIM sau R-uim de la Zapp )

Cred ca cere o resoftare.

care ma ajuta si pe mine cu coduri pentru zapp z130? nu am gasit nimic...si am nevoie de o resetare totala in primul rand ca imi face nishte faze dand dau reply la sms-uri:(

Stie cineva codul pentru programing (cred ca SPC-ul) pentru Z910i? Am incercat ##321456987*, dar nu a functionat.

 LunaCrystal, on 11th May 2009, 19:16, said:

   Stii cumva unde pot face o resoftare la un Synertek S200 ? ....sau daca o pot face singur acasa cu cablul de date?

Cum se poate face o resetare (hard reset ) la z910i am uitat security code si nu ma lasa sa sterg mai multe fisiere fara parola.pentru reprogramare cere parola.ms

Bun,cu codul am rezolvat l-am resetat cu un program.Alta problema.Am un telefon zap z810i cu un numar expirat care nu se mai activeaza si un z910i cu numar bun tot in "memorie".Am 2 cartele nopay cu numar, Cum fac sa pun aceste numere in telefoanele de mai sus deoarece daca le bag in locasul pentru cartela telefoanele nu fac nimic pornesc incontinuare ca si cum nu ar fi cartele in interior.?!?!Am incercat nam programing cu , cod dar nu ma lasa cere ceva cod de securitate?!Ala este spc-ul?Nu se poate pune pe auto-nam si sa ia de pe cartela numarul?Multumesc.

Salutare, va rog daca stiti careva SPC code pentru Z530i, sa mi-l dati pe privat sau aici.
mersi