Slackware

salut,am reusit sa instalez Slackware 11 cu succes dar nu reusesc sa instalez si placa de retea adica o recunoaste dar nu pot sa o folosesc.....===>
root@a:~# lspci
00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 81)
00:01.0 PCI bridge: Intel Corporation 945G/GZ/P/PL Express PCI Express Root Port (rev 81)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 [Sapphire X550 Silent]
01:00.1 Display controller: ATI Technologies Inc RV370 secondary [Sapphire X550 Silent]
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 15)[/size][/b]
04:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
04:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
04:02.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01)
04:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
root@a:~#                          


root@a:~# ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0   TX bytes:0 (0.0

root@a:~#                                            

Nu are drivere pt ea sau nu stiu eu sa o configurez?

dupa cum ti-am spus si pe privat, cauta sa instalezi kernel 2.6 si sa dai modprobe sk98lin, apoi lsmod ca sa te asiguri ca acel modul e inserat. Din cite am inteles folosesti dhcp deci va trebui sa dai netconfig (e un script specific slackware). Daca nu merge sa inserezi modulul placii de retea, solutia ramine recompilare de kernel.

dar ifconfig -a ce zice ?

ifconfig simplu pe Linux iti afiseaza interfetele configurate care sunt active citez :

"If no arguments are given, ifconfig displays the status of the currently active interfaces.  If a single interface argument is given, it displays the status of the given interface only;
if a single -a argument is given, it displays the status of all interfaces, even those that are down.  Otherwise, it configures an interface."

Daca nici asa atunci aplici solutia lui cianura.

Edited by infernal, 07 January 2007 - 21:13.