Jump to content

SUBIECTE NOI
« 1 / 5 »
RSS
Info Coronavirus/Vaccinare vs Fake News

ecranul laptopului se intuneca ri...

Centrala ferroli pe peleți

Tv cu slot card CI și intrar...
 My Profit Land - MPL

Otel carbon

Capcane pentru șoareci

Passat B8
 La volan baut si fara permis? Ped...

Reconditionare gard fier forjat/p...

7artisans 4mm F/2.8 fisheye circu...

DVD-uri INTENSO
 Perlele internetului in Germania

Invision Community, Editați ...

Despre cei ce ti se adreseaza agr...

Dispar mesaje din Messenger Faceb...
 

Placa PCI USB

- - - - -
  • Please log in to reply
8 replies to this topic

#1
sanduspa

sanduspa

    Junior Member

  • Grup: Members
  • Posts: 37
  • Înscris: 05.07.2004
Am montat un convertor pci usb pe un calculator cu o placa de baza mai veche, dar sistemul de operare nu detecteaza placa, iar daca rulez add new hrdware si pun tipul de placa si driverele corespunzatoare, tot nimic.
Placa de baza este ASKA SST-5830, iar procesorul este Intel Celeron II, 566 Mhz

Ce as putea face?

Merci.

#2
Skelet

Skelet

    Active Member

  • Grup: Members
  • Posts: 1,376
  • Înscris: 30.11.2003
Pune placa in alt slot pci

#3
sanduspa

sanduspa

    Junior Member

  • Grup: Members
  • Posts: 37
  • Înscris: 05.07.2004
am facut-o, dar fara rezultate!

#4
Crash

Crash

    Senior Member

  • Grup: Senior Members
  • Posts: 3,066
  • Înscris: 27.08.2002
dezactiveaza controlerul USB onboard din bios......eventual poti pune un bracket usb pe placa de baza

#5
sanduspa

sanduspa

    Junior Member

  • Grup: Members
  • Posts: 37
  • Înscris: 05.07.2004
placa nu are controler USB

#6
lucize

lucize

    Member

  • Grup: Members
  • Posts: 438
  • Înscris: 10.12.2001
poate placa ta de baza nu suporta pci 2.1

#7
sanduspa

sanduspa

    Junior Member

  • Grup: Members
  • Posts: 37
  • Înscris: 05.07.2004

lucize, on Jun 29 2005, 17:14, said:

poate placa ta de baza nu suporta pci 2.1

<{POST_SNAPBACK}>




Placa PCI USB are urmatoarele caracteristici:


USB 2.0 Driver Version 1.10


=========================
1.0 Key Product Features:
=========================
                                                                              
- Compliant with Universal Serial Bus Specification Revision 2.0
  and EHCI v0.95.
- Supports USB 1.1 & 2.0 under Windows 98SE, Windows ME, Windows 2000 and
  Windows XP.
- Full backward compatibility with all USB 1.1 devices.
- Supports Plug & Play. Users can dynamically attach, remove and
  reconfigure peripherals without powering down the system.
- Enables USB 2.0 devices to operate as high-speed devices (480 Mbps).

========================
1.1 System Requirements:
========================

PC System Requirements
- IBM-compatible PC, 266 MHz Processor, 32 MB RAM.
- Windows 98SE, Windows ME, Windows 2000, or Windows XP
- Available PCI or PC Card slot

=======================
2.0 Driver Limitations:
=======================
The following USB 2.0 devices and features are not supported
in this driver release:

1. No Hi-Speed Isochronous Support

2. No Remote Wakeup Support

3. No Over Current Detection Support

4. May have problem when plugging in and out during Stand-by, transition to Stand-by or transition to Resume

5. May not eject CardBus Card from Windows 98 or ME

6. Mulitiple USB 2.0 Hubs plugged into the Host Controller at startup will not work. Workaround: Cascade hubs or plug in second after system is up.


=========================
2.1 Troubleshooting Info:
=========================
1. When using Windows ME, the Device Manager will have a green
   question mark next to any USB 2.0 device which is connected
   to a USB 2.0 card. The device will continue to
   function properly. This is an operating system feature.

2. When using Windows 98SE, if the system attempts to enter
   in-active standby (S3 mode), the driver will only allow it to
   enter standby (S1 mode).

3. When doing a hot-unplug/hot-plug, the system may not recognize
   the USB 2.0 device.  To workaround this issue, allow at
   least 3 seconds between a hot-unplug and hot-plug.

4. When using Windows 2000 and XP, if two or more USB 2.0 devices are
   disconnected using the "unplug or eject hardware" icon in the
   system tray without physically removing the device, then when
   one of the USB 2.0 devices is physically removed, the other
   USB 2.0 device will re-enumerate.  To workaround this issue,
   hot-unplug each USB device you want to remove before using
   the "unplug or eject hardware" icon to remove the next USB
   device.

5. When using Windows 2000 and XP, with certain CD-RW applications
   running, the system may stall if an USB CD-RW drive is
   removed using the "unplug or eject hardware" icon in the
   system tray.
  
6. When using Windows 98SE, Windows ME, Windows 2000 and Windows XP,
   the system may not behave properly should it attempt to
   enter active-standby (S3 mode).

========================
2.2 USB 2.0 Device List:
========================
USB 2.0 IDE Bridge
USB 2.0 Hard Disk
USB 2.0 CDRW
USB 2.0 Scanner

========================
2.3 USB 1.1 Device List:
========================
Iomega USB 1.1 Zip 250
Logitech Wingman Extreme Digital 3D (USB Game Controller)
Logitech WheelMouse (USB Mouse)
Adaptec USBXchange with SCSI Hard Disk
Addonics USB Web Camera
Umax Astra 1220S Colour Scanner
Microsoft USB IntelliMouse Explorer
Microsoft USB Internet Keyboard
Microsoft Sidewinder Joystick
Intel USB Video Camera
Hewlett-Packard ScanJet 6300C
Hewlett-Packard DeskJet 840C Printer
Creative Video Blaster Web Camera
Epson Stylus Colour 680 Printer
Epson 610 Perfection Scanner
Addonics USB Web Camera
OEM USB Hub

----------------------------------
27.11.2001 English

#8
Skelet

Skelet

    Active Member

  • Grup: Members
  • Posts: 1,376
  • Înscris: 30.11.2003
Pe alt calc merge? mai ai alte placi pe pci?

#9
CUSTOMERCUS

CUSTOMERCUS

    Member

  • Grup: Members
  • Posts: 357
  • Înscris: 06.01.2004
nici mie nu mi-au mers de mai multe ori placi pci/usb 2.0 pe placi de baza mai vechi.dar in schimb au mers cele doar cu usb 1.1.nici alea toate.

Anunturi

Chirurgia cranio-cerebrală minim invazivă Chirurgia cranio-cerebrală minim invazivă

Tehnicile minim invazive impun utilizarea unei tehnologii ultramoderne.

Endoscoapele operatorii de diverse tipuri, microscopul operator dedicat, neuronavigația, neuroelectrofiziologia, tehnicile avansate de anestezie, chirurgia cu pacientul treaz reprezintă armamentarium fără de care neurochirurgia prin "gaura cheii" nu ar fi posibilă. Folosind tehnicile de mai sus, tratăm un spectru larg de patologii cranio-cerebrale.

www.neurohope.ro

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Forumul Softpedia foloseste "cookies" pentru a imbunatati experienta utilizatorilor Accept
Pentru detalii si optiuni legate de cookies si datele personale, consultati Politica de utilizare cookies si Politica de confidentialitate