canon mp270

salut.........am si eu o imprimanta Canon pixma MP270 si imi apare pe afisaj P2 si palpaie ledul cu semnul triunghi si sageata.......si nu stiu ce semnifica ..........ma poate ajuta cineva?........ms

ADIDINHD, on 17th March 2010, 21:50, said:

Manualu' ce zice ?

aia e ca nu am manualul.............ce am descarcat de pe net in format pdf nu scrie

ADIDINHD, on 17th March 2010, 22:01, said:

Bun, te credem................uite ce am gasit la prima cautare.........
An Error Code Is Displayed on the LED
Issue

    * Alarm Lamp Is Lit Orange







When a machine error occurs, the Alarm lamp is lit orange and E and number (error code) are alternately displayed on the LED. Check the error code displayed on the LED and take the appropriate action to correct the error.



* Depending on the error occurred, the Alarm lamp is not lit.



    * Power Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately




When the Power and Alarm lamps flash alternately as shown below, and P and number (error code) are alternately displayed on the LED, an error requiring servicing might have occurred.






LED Displays

E, 0, 2
The machine is out of paper / Paper does not feed



Summary

Reload the paper on the Rear Tray correctly and press the Black or Color button.





LED Displays

E, 0, 3
Paper Output Tray is closed / Paper jam



Summary

If the Paper Output Tray is closed, open it. The machine resumes printing.



If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.





LED Displays

E, 0, 4 / E, 0, 5
The FINE Cartridge cannot be recognized



Summary

The FINE Cartridge may not be installed properly, or the Cartridge may not be compatible with this machine.



Open the Scanning Unit (Cover) and install the appropriate FINE Cartridge.



If the error is not resolved, contact the service center.




LED Displays

E, 0, 7
FINE Cartridge is not installed in the correct position



Summary

Make sure that each FINE Cartridge is installed in the correct position.




LED Displays

E, 0, 8
Ink absorber is almost full



Summary

Press the machine's Black or Color button to continue printing. Contact the service center.




LED Displays

E, 0, 9 **MP270 only**

The machine has not received a response from the digital camera. The digital camera or digital video camcorder connected is not compatible with this machine.

Summary Check the device connected to the machine. Printing photos directly is possible only with a PictBridge compliant device.

A communication time out occurs if an operation takes too long or if it takes too much time to send data. This may cancel printing. In such cases, disconnect and reconnect the USB cable.

When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge compliant print mode on the device before connecting it to the machine. You may also have to turn on your device or select Play mode manually after connecting the device to the machine. Perform necessary operations before connecting your device referring to its instruction manual.

If the error is still not resolved, check if you can print another photograph.


LED Displays

E, 1, 3
Ink level cannot be detected.



Summary

Ink may have run out.
The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly detected.
If you want to continue printing without this function, press the machine's Stop (Reset) button for at least 5 seconds.
Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.
Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.


LED Displays

E, 1, 4
The FINE Cartridge cannot be recognized.
Summary

The FINE Cartridge may not be compatible with this machine.



Install the appropriate FINE Cartridge.





LED Displays

E, 1, 5
The FINE Cartridge cannot be recognized.



Summary

The FINE Cartridge may not be installed properly.



Open the Scanning Unit (Cover) and install the FINE Cartridge properly.




LED Displays

E, 1, 6
Ink has run out.



Summary

Ink has run out.



Replace the ink cartridge and close the Scanning Unit (Cover).



If printing is in progress and you want to continue printing, press the machine's Stop (Reset) button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.



The function for detecting the remaining ink level will be disabled.



Replace the empty ink cartridge immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under the ink out condition.




LED Displays E, 1, 9 **MP270 only**

PictBridge compliant device is connected via a USB hub.
Summary If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the machine.


LED Displays

E, 3, 0
The size of the original cannot be correctly detected or the document is too small when the Fit-to-Page copying is selected.



Summary

    * Make sure that the original meets the requirements and is correctly loaded on the Platen Glass.
    *



    * Check the position and direction of the original loaded on the Platen Glass.





LED Displays

E, 3, 1
The machine is not connected with the computer.



Summary

Connect the machine and the computer with a USB cable.




LED Displays

E, 5, 0
Scanning the print head alignment sheet has failed.



Summary

Press the Stop/Reset button to dismiss the error, then take the actions described below.



    * Make sure that the print head alignment sheet is set in the correct position and orientation on the Platen Glass.
    *



    * Make sure the Platen Glass and the print head alignment sheet are not dirty.
    *



    * Make sure the type and size of loaded paper is suitable for Automatic Print Head Alignment.For Automatic Print Head Alignment, always load one sheet of A4 or letter-sized plain paper.
    *



    * Make sure if Print Head nozzles are clogged.Print the nozzle check pattern to check the status of the Print Head.







If the error is not resolved, connect the machine to the computer and align the Print Head on the printer driver.





LED Displays

P, 0, 2

Summary

Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE Cartridge Holder from moving, and turn on the machine again.

    NOTE
    When protective materials are not removed yet,please follow the procedures below.



    1. Open the Paper Output Tray.



    2. Lift the Scanning Unit (Cover) and fix it with the Scanning Unit Support.



    3. Pull the orange protective tape (D) and remove the protective material (E).



    4. Lift the Scanning Unit (Cover) slightly and fold the Scanning Unit Support, then gently close the Scanning Unit (Cover).



    IMPORTANT

        * Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it.
        *



        * If the problem is not resolved, contact the service center.





LED Displays

P, *, *

Summary

"*, *" depends on the error occurred.



    * "P, 1, 0" is displayed:




Turn off the machine, and unplug the power cord of the machine from the power supply.Contact the service center.



    * "P, 0, 3" is displayed:




If any object is placed in front of the machine, remove it.Open the Paper Output Tray gently, then turn the power off and back on.



    * In other cases:




Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.If the problem is not resolved, contact the service center.

Edited by ChemTeacher, 17 March 2010 - 22:08.

ChemTeacher, on 17th March 2010, 21:51, said:

multumesc........aceasta informatie o cautam......multumesc mult

ADIDINHD, on 17th March 2010, 22:50, said:

Eu am o multifunctionala CANON MP270 de 3 luni si dupa reumplerea cartuselor nu le mai recunoaste. Ca sa nu mai vorbim ca toate culorile sunt amestecate, nu sunt clare. Am sunat la ei la service si mi-au zis ca trebuie sa cumpar cartuse noi de fiecare data altfel risc sa se arda nu stiu ce contacte la ea daca le reumplu pentru ca nu recunoaste doar cartusele cu tus original CANON.
In consecinta e o mare teapa MP270 sa dai 70-80 Ron de fiecare data pe cartuse!

marian78ro, on 2nd June 2010, 14:30, said:

Acelasi lucru l-am patit si eu (nu mai imprima dupa ce cartusul negru livrat odata cu multifunctionalul a fost reincarcat de mai multe ori). Dar am rezolvat situatia fara sa cumpar un cartus original resetand imprimanta:
Reset can be done once your printer is on Service Mode:
a. Switch Off the Printer
b. Hold the Resume Button(triunghi inscris in cerc rosu)
c. Switch On and Hold the Power Button
d. Release the Resume Button
e. Press the Resume Button Twice
f. Release the Power Button

By this time your printer is in service mode already.

Run the Service Tool Program (Resetter): http://hotfile.com/d...164016/37b9cb4/ ... 0.rar.html

Select EUR as the Region (depends on your location)
Set Clear Waste Ink Tank, select Main & Platen
Click Cleaning 1 (Printer will print)
Then Click Main and Platen

Softul recunoaste si modelele Canon iP3600, iP4600, MP190, MP240, MP260, MP480, MP540, MP620, MP630, MP980

Buna,

Am o mica-mare problema cu o astfel de imprimanta mp270. Sper sa nu fi dat banii degeaba.
Problema mea este cartusul color. Am umplut cartusul si culoarea rosie nu se mai printeaza. Am curatat cartusul manual, adica l-am introdus in apa calduta, l-am golit (am extras cerneala cu seringa) si apoi am scos buretii din interior si cam atat. Nu mai stiu ce sa-i fac. Va rog sa ma ajutati.

Merci!

_Ghid de utilizare depanare in romana pentru Canon MP270 si MP250

http://ifile.it/lrc6ha9