Danitzi
28th February 2006, 10:57
Am un tv PANASONIC TX29PS2P, de cind l-am cumparat imaginea este deplasata catre stinga circa 2 cm, stie cineva care este combinatia de taste pentru a intra in modul service?
Imi cer scuze, un moderator daca poate muta postul in professional zone - electronica?
*Victor*
28th February 2006, 16:50
QUOTE(Danitzi @ Feb 28 2006, 10:57)

Am un tv PANASONIC TX29PS2P, de cind l-am cumparat imaginea este deplasata catre stinga circa 2 cm, stie cineva care este combinatia de taste pentru a intra in modul service?
Imi cer scuze, un moderator daca poate muta postul in professional zone - electronica?
http://forum.softpedia.com/index.php?showtopic=25733
Nu e chiar modelul tau, dar sper sa-ti fie de folos.
Danitzi
1st March 2006, 12:08
Multumesc!
Mai are cineva vreo idee?
Danitzi
2nd March 2006, 08:40
Nimeni?
Acta non verba
2nd March 2006, 09:51
Poate sunt similare cu acestea:
Pentru TX29P800T
QUOTE
Selection of SERVICE 1 Mode
Adjust the Volume “ZERO” and set OFF TIMER button to 30 min. Then simultaneously press the Recal button on the remote control and Volume button - the TV set.
Selection of SERVICE 1 Mode
Cursor moves each Mode by pressing “3” or “4” of 10 key button on the remote control.
Selection of SERVICE 2 Mode
Adjust the Volume “ZERO” and set OFF TIMER button to 30 min. Then simultaneously press the Recal button on the remote control and Volume button - the TV set then press MUTE button together press - button on the TV set.
Selection of HOTEL Mode
Press recall button on the remote control and press button + on the TV set.
Pentru TX-29F155T
QUOTE
Selection of Market Mode
Adjust the VOLUME “zero” and set OFF TIMER Button to 30 min. Then, simultaneously press the RECALL Button on the remote control and the VOLUME DOWN button - the TV set.
Selection of Service Mode
Press green button to select for adjustment mode, to adjust press yellow or blue button.
Set to normal mode
Press the volume down button on front control, together press the off timer button on remote control
Acta non verba
2nd March 2006, 10:02
sau
Panasonic TX-W28R3
QUOTE
The remote control is used for entering and storing adjustments, with the exception of cut-off adjustments which must always be done prior to service adjustment. Perform adjustments in accordance with screen display. The display on the screen also specifies the CCU variants as well as the approximate setting values. The adjustment sequence for the service mode is indicated below.
Set the Bass to maximum position, set the Treble to minimum position, press the Reveal on the remote control and at the same time press the Volume on the customer controls at the front of the TV, this will place the TV into the Service mode.
Press the RED/GREEN buttons to step down / up through the functions.
Press the YELLOW/BLUE buttons to alter the function values.
Press the STORE button on the preset panel after each adjustment has been made to store the required values.
To exit the Service Mode press the Normalization button.
Danitzi
2nd March 2006, 11:47
Multumesc mult pentru raspuns dar pe telecomanda nu am buton RECALL sau REVEAL
miniteh
2nd March 2006, 14:34
Salut,
Incearca urmatoarea combinatie si spune, daca a mers. Nu e de la exact modelul tau,dar e de la un model apropiat. Deci:
- Pune tv pe Program 99 si adu Sharpnes la minim.
- Apasa simultan pe butonul Mute de pe telecomanda si butonul sageata in jos de pe tv. Tv-ul trebuie sa comute in Service Mode. Pentru a iesi din Service Mode, apesi butonul Menu.
Succes!
Danitzi
2nd March 2006, 15:11
Merci, incerc si zic miine daca a mers
miniteh
2nd March 2006, 15:17
Vezi ca in general, la tv Panasonic mai noi, pe eticheta din spate scrie sasiul. Ceva un Z urmat de cifre sau GP urmat de cifre. Poate asa descoperim mai usor ce service manual trebuie.
Danitzi
2nd March 2006, 15:28
OK, ma uit si zic. Multumesc mult!
Danitzi
3rd March 2006, 08:22
SUPER!!!! Multumesc mult @miniteh!
A mers combinatia de taste si am intrat in Menu Service1 de unde am putut modifica pozitia imaginii pe orizontala. Tipul sasiului chiar daca nu mai conteaza este: GP3
Multumiri deasemenea, @acta non verba si lui @*victor*
In curand... autoevolution.ro
Teste, stiri, ghiduri, jurnale, forum si multe altele!
Aceasta este o versiune simplificatã a paginii originale. Pentru a vizita versiunea originala
click aici.