Neurochirurgie minim invazivă
"Primum non nocere" este ideea ce a deschis drumul medicinei spre minim invaziv. Avansul tehnologic extraordinar din ultimele decenii a permis dezvoltarea tuturor domeniilor medicinei. Microscopul operator, neuronavigația, tehnicile anestezice avansate permit intervenții chirurgicale tot mai precise, tot mai sigure. Neurochirurgia minim invazivă, sau prin "gaura cheii", oferă pacienților posibilitatea de a se opera cu riscuri minime, fie ele neurologice, infecțioase, medicale sau estetice. www.neurohope.ro |
despre KVM...?
Last Updated: Sep 05 2007 19:32, Started by
deufren
, Sep 05 2007 19:32
·
0
#1
Posted 05 September 2007 - 19:32
Salutare tuturor.In primul rand vreau sa va zic ca abia mi-am acizitionat un PS/2-USB Mini KVM Switch CPK4682,cu mufe pentru tastatura si mouse, in valoare de 100 ron(de la mag cu renume in Bucuresti)
In al doile rand nu stiu sa-l folosesc,am intrebat in magazin cum si ce fel iar baietii de acolo mi-au zis ca are cd in dotare ,ceea ce este adevarat.Am ajuns acasa si pauza ....dupa ce am incercat sa citesc in 2 limbi ,ceea ce scrie acolo la mine nu se intampla, vedeti exemplu: GB Thank you for purchasing the Bandridge KVM switch. Hardware Installation: Please turn off all peripherals and computers before installation. 1) Connect the Keyboard, VGA Monitor, and Mouse to the console ports on the KVM switch. 2) Connect the Keyboard, VGA, and Mouse Cables to the computer ports on the KVM switch. 3) This KVM Switch product is ready to use after the computers complete the boot-up process. Note: Please do not run Hot Key commands while your computer is booting up. Hot key keyboard command. To send commands to the KVM Switch, press the Scroll Lock key twice within two seconds. You will hear a beep confirming your command. The following are the different commands: Scroll Lock Scroll Lock Previous Channel Scroll Lock Scroll Lock Next Channel Scroll Lock Scroll Lock S Auto Scan (Factory default off ) SCROLL LOCK SCROLL LOCK 1 (or 2) Select PC port directly Press any key or the spacebar to exit the Auto scan Mode Troubleshooting: Make sure that all the cables are labeled. Label each and every cable with the number for each respective computer to avoid confusion. 1) Do not press any keys on the keyboard while the selected computer is booting up. This might cause a keyboard error , where the PC cannot detect the keyboard. 2) If the computer boots-up successfully, but the keyboard does not work, then: • Make sure the keyboard works when its directly plugged into the computer. • Try another keyboard, use 101, 102, 104 keyboards only 3) If the PC does not detect the Mouse while booting up, • Make sure the mouse works when its directly plugged into the computer. • Make sure it’s a PS/2 mouse • Try a different mouse 5) Avoid moving the mouse or pressing the buttons on the mouse when switching ports. Poate reuseste cineva sa imi vina in ajutor macar cu o idee!!! Va multumesc. |
Anunturi
▶ 0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users